Skip to main content
Main Penn College Website

Student-designed transmission passes test for Baja SAE team


Months of painstaking work resulted in an impressive showing on the international stage for Pennsylvania College of Technology at the recent Society of Automotive Engineers’ event in Cookeville, Tennessee.

Featuring a new, student-designed continuously variable transmission, the college’s single-seat, off-road vehicle finished eighth out of 96 cars in the endurance race at Baja SAE Tennessee Tech. It’s the college’s eighth top 10 finish in the race – considered Baja SAE’s marquee event – since 2011.

“I couldn’t be happier with the way our car performed with the new CVT,” said John G. Upcraft, instructor of manufacturing and machining and adviser to the college’s Baja SAE club. “We were one of the fastest 10 cars. Nobody pulled away from us. We most likely would have finished higher if the race wasn’t shortened. We usually do our best in the last hour of the event.”

Pennsylvania College of Technology’s entry in Baja SAE Tennessee Tech finished eighth out of 96 cars in the endurance-race portion of the Society of Automotive Engineers’ recent event in Cookeville, Tenn.
Pennsylvania College of Technology’s entry in Baja SAE Tennessee Tech finished eighth out of 96 cars in the endurance-race portion of the Society of Automotive Engineers’ recent event in Cookeville, Tenn.

The threat of severe weather cut about 90 minutes off the race, which was scheduled to last four hours.

The Penn College entry began the endurance event in the 23rd position and steadily advanced to third. After being rear-ended and suffering a broken tire seal, Penn College fell back a lap, but its eighth-place showing still topped many notable schools, including Notre Dame, Cornell, Nebraska, UCLA, Northwestern, Bucknell, Virginia, West Virginia and Rochester Institute of Technology.

“We pushed our previous CVT, which we had purchased, as far as it could go,” Upcraft said. “It was very gratifying to see our new CVT prove itself during actual racing conditions.”

Several students spent about a year designing, manufacturing the parts and assembling the new CVT, which is three pounds lighter than the previous version and features better material (titanium and aluminum) and a greater shift range for the 330-pound car.

“The new CVT really sets us up to be a very competitive team well into the future,” Upcraft said.

The college will put it to the test again when it competes at Baja SAE Rochester in Rochester, New York, June 6-9.

“Overall, we have some small things to address with the car for it to be ready for Rochester, but we are very optimistic that we will do well,” Upcraft said.

Members of the design crew for Penn College’s Baja SAE team pose beside their handiwork during a break at a recent competition in Tennessee. From left are Jacob C. Hudock, of Berwick; Bradley M. Haines, of Mifflinburg; Shujaa AlQahtani, of Saudi Arabia; Trevor M. Clouser, of Millmont; Mark A. Turek, of Red Lion; and Matthew J. Nyman, of Lock Haven.
Members of the design crew for Penn College’s Baja SAE team pose beside their handiwork during a break at a recent competition in Tennessee. From left are Jacob C. Hudock, of Berwick; Bradley M. Haines, of Mifflinburg; Shujaa AlQahtani, of Saudi Arabia; Trevor M. Clouser, of Millmont; Mark A. Turek, of Red Lion; and Matthew J. Nyman, of Lock Haven.

Penn College competitors at Baja SAE Tennessee Tech were: manufacturing engineering technology students Shujaa AlQahtani, of Saudi Arabia; Christopher M. Schweikert, of Jamison; John D. Kleinfelter, of Lebanon; Trevor M. Clouser, of Millmont; Myron D. Milliken, of Lewistown; Dakota C. Harrison, of Lewisberry; and Dominic J. Lepri, of Monroe Township, New Jersey; engineering design technology students Matthew J. Nyman, of Lock Haven; Bradley M. Haines, of Mifflinburg; Mark A. Turek, of Red Lion; and Jacob C. Hudock, of Berwick; engineering CAD technology student Corey J. Mason, Lake City; automated manufacturing technology student Daniel M. Gerard, of Doylestown; and building construction technology student Stephen T. Lang, of Mercer.

“It’s inspiring to see the hard work of students pay off with an impressive performance against a strong international field,” said David R. Cotner, dean of Penn College’s School of Industrial, Computing & Engineering Technologies. “All of us at the college look forward to watching them build on that success in Rochester and beyond.”

For information about majors offered by the School of Industrial, Computing & Engineering Technologies, call 570-327-4520.

Penn College is a national leader in applied technology education. Email the Admissions Office or call toll-free 800-367-9222.

Comments

We’ll never share your email with anyone else.

Penn College welcomes comments that are on topic and civil. Read our full disclaimer.

Related Stories

A partnership between Pennsylvania College of Technology and the Northeast PA Manufacturers & Employers Council is creating a scholarship opportunity for YES (Your Employability Skills) Northeast Program graduates who enroll at the college. Administered by the council, YES is a year-round elective course addressing the shortfall of basic skills that employers say are lacking in many job applicants. Celebrating the partnership recently are (from left) Carolyn R. Strickland, vice president for enrollment management/associate provost at Penn College; Courtney L. Fasnacht, executive director of the Northeast PA Manufacturers & Employers Council; NEPA MAEC President Darlene J. Robbins; Penn College President Davie Jane Gilmour; Matt Shuey, communications and program director for the council; and Audriana L. Empet, the college’s director of admissions. Automated Manufacturing & Machining
Partnership extends scholarship support to ‘YES’ program grads
Read more
Pennsylvania College of Technology graduate Daniel J. Ravizza has combined his technical skills and lifelong love of history in serving as an objects conservator at the Smithsonian Institution’s Steven F. Udvar-Hazy Center in Chantilly, Virginia, the annex of the National Air and Space Museum in Washington, D.C. Automated Manufacturing & Machining
Penn College grad preserves history at the Smithsonian
Read more
Thanks to a National Science Foundation grant, 10 Pennsylvania College of Technology manufacturing students and two faculty will be able to study for 16 days in Germany, a world leader in computer numerical control technology. Automated Manufacturing & Machining
Penn College manufacturing students to study in Germany    
Read more